转瓶Spinner Flasks，细胞培养的一种容器。中间有一根带桨叶的轴，使用时将转瓶放置在转瓶机上。转速由转瓶机控制，带动桨叶转动，使液体混合。由于它使培养由静态变为动态，是一种简化的生物反应器，所以通常作为生物反应器放大的模拟。它适合于悬浮细胞和贴壁细胞(对微载体系统而言)培养。
CLS-1430
SPINNER FLASKS, BIOPROCESS, COMPLETE
Microcarrier spinner flasks promote optimal growth of suspension and microcarrier cultures. Indented bottoms, 100mL thru 1000mL, prevent accumulation of microcarrier beads under the impeller paddle. Please Note: The 3L, 6L & 8L Versions Do Not Have Dimpled Bottoms. The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts trough the compression fitting in the cap.
Replacement Components:
· The impeller assembly consists of the lower magnetic stir bar, impeller blade and blade holder
· The replacement shaft is the glass portion only
· The cap assembly consists of the corresponding screw cap, liner and compression fitting
|
Item Number |
Item Description |
PQ |
|
CLS-1430-100 |
BioProcess Spinner Flask, 100mL, Dimpled Bottom, Complete |
EACH |
|
CLS-1430-250 |
BioProcess Spinner Flask, 250mL, Dimpled Bottom, Complete |
EACH |
|
CLS-1430-500 |
BioProcess Spinner Flask, 500mL, Dimpled Bottom, Complete |
EACH |
|
CLS-1430-1L |
BioProcess Spinner Flask, 1,000mL, Dimpled Bottom, Complete |
EACH |
|
CLS-1430-3L |
BioProcess Spinner Flask, 3,000mL, Plain Bottom, Complete |
EACH |
|
CLS-1430-6L |
BioProcess Spinner Flask, 6,000mL, Plain Bottom, Complete |
EACH |
|
CLS-1430-8L |
BioProcess Spinner Flask, 8,000mL, Plain Bottom, Complete |
EACH |
|
Replacement Parts |
|
|
|
CLS-1705-106 |
#106 Orange Silicone O-Ring |
|
|
CLS-1431-03 |
Impeller Assembly Only, for 100mL-250mL BioProcess Spinner Flasks |
|
|
CLS-1431-05 |
Impeller Assembly Only, for 500mL BioProcess Spinner Flasks |
|
|
CLS-1431-06 |
Impeller Assembly Only, for 1L & 3L BioProcess Spinner Flasks |
|
|
CLS-1431-07 |
Impeller Assembly Only, for 6L & 8L BioProcess Spinner Flasks |
|
|
CLS-1425-21 |
Glass Shaft Only, 7mm, 100mL & 250mL Spinner Flasks |
|
|
CLS-1425-22 |
Glass Shaft Only, 7mm, 500mL Spinner Flasks |
|
|
CLS-1425-23 |
Glass Shaft Only, 7mm, 1,000mL Spinner Flasks |
|
|
CLS-1425-24 |
Glass Shaft Only, 7mm, 3,000mL Spinner Flasks |
|
|
CLS-1425-25 |
Glass Shaft Only, 9mm, 6000mL, 8000mL & 15000mL Spinner Flasks |
|
|
CLS-1432-42 |
Cap Assembly Only, for 100mL, 250mL & 500mL BioProcess Sinner Flasks |
|
|
CLS-1432-43 |
Cap Assembly Only, for 1,000mL & 3,000mL BioProcess Sinner Flasks |
|
|
CLS-1432-44 |
Cap Assembly for 6L, 8L, 15L & 36L BioProcess Sinner Flasks |
|
|
CLS-1705-110 |
Silicone O-Ring for 9mm Compression Fitting, FDA Grade |
|
|
CLS-1425-91 |
Stir Bar Magnet Only, 50mL-500mL Spinner Vessels |
|
|
CLS-1425-92 |
Stir Bar Magnet Only, 1,000mL-3,000mL Spinner Vessels |
|
|
CLS-1425-93 |
Stir Bar Magnet Only, 6,000mL-36,000mL Spinner Vessels |
|
|
CLS-1430-001 |
7mm Black Compression Fitting |
|
|
CLS-1430-003 |
9mm Black Compression Fitting |
|
|
CLS-1430-002 |
Silicone Plug Stoppers, 7mm |
|
|
CLS-1430-004 |
Silicone Plug Stoppers, 9mm |
|
|
CLS-1425-82 |
Spinner Cap Gasket, FDA Grade Silicone, 70mm Cap |
|
|
CLS-1430-83 |
Spinner Cap Gasket, FDA Grade Silicone, 100mm Cap (7mm) |
|
|
CLS-1425-84 |
Spinner Cap Gasket, FDA Grade Silicone, 100mm Cap (9mm) |
|
CLS-1430-F
SPINNER FLASKS, FLAT BOTTOM, BIOPROCESS, COMPLETE
Flat bottom spinner flasks promote optimal growth of suspension cultures. The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts through the compression fitting in the cap.
Replacement Components:
· The impeller assembly consists of the lower magnetic stir bar, impeller blade and blade holder
· The replacement shaft is the glass portion only
· The cap assembly consists of the corresponding screw cap, liner and compression fitting
|
Item Number |
Item Description |
PQ |
|
CLS-1430-F100 |
BioProcess Spinner Flask, 100mL, Flat Bottom, Complete |
EACH |
|
CLS-1430-F250 |
BioProcess Spinner Flask, 250mL, Flat Bottom, Complete |
EACH |
|
CLS-1430-F500 |
BioProcess Spinner Flask, 500mL, Flat Bottom, Complete |
EACH |
|
CLS-1430-F1L |
BioProcess Spinner Flask, 1,000mL, Flat Bottom, Complete |
EACH |
|
CLS-1430-F3L |
BioProcess Spinner Flask, 3,000mL, Flat Bottom, Complete |
EACH |
|
Replacement Parts |
|
|
|
CLS-1705-106 |
#106 Orange Silicone O-Ring |
|
|
CLS-1431-03 |
Impeller Assembly Only, for 100mL-250mL BioProcess Spinner Flasks |
|
|
CLS-1431-05 |
Impeller Assembly Only, for 500mL BioProcess Spinner Flasks |
|
|
CLS-1431-06 |
Impeller Assembly Only, for 1L & 3L BioProcess Spinner Flasks |
|
|
CLS-1425-21 |
Glass Shaft Only, 7mm, 100mL & 250mL Spinner Flasks |
|
|
CLS-1425-22 |
Glass Shaft Only, 7mm, 500mL Spinner Flasks |
|
|
CLS-1425-23 |
Glass Shaft Only, 7mm, 1,000mL Spinner Flasks |
|
|
CLS-1425-24 |
Glass Shaft Only, 7mm, 3,000mL Spinner Flasks |
|
|
CLS-1432-42 |
Cap Assembly Only, for 100mL, 250mL & 500mL BioProcess Spinner Flasks |
|
|
CLS-1432-43 |
Cap Assembly Only, for 1,000mL & 3,000mL BioProcess Spinner Flasks |
|
|
CLS-1425-91 |
Stir Bar Magnet Only, 50mL-500mL Spinner Vessels |
|
|
CLS-1425-92 |
Stir Bar Magnet Only, 1L-3L Spinner Vessels |
|
|
CLS-1430-001 |
7mm Compression Fitting, Black |
|
|
CLS-1430-002 |
7mm Silicone Plug Stoppers |
|
|
CLS-1425-82 |
Spinner Cap Gasket, White FDA Grade Silicone, 70mm Cap |
|
|
CLS-1425-83 |
Spinner Cap Gasket, 7mm, White FDA Grade Silicone, 100mm Cap |
|
CLS-1450
INTERNAL IMPELLER SPINNER FLASKS, BIOPROCESS, COMPLETE
MicroCarrier spinner flasks promote optimal growth of suspension and microcarrier cultures. Indented bottom (100mL thru 1000mL) prevents accumulation of microcarrier beads under the impeller paddle. The 3L version does not have a dimple. The complete system includes a flask with two angled sidearms and a PTFE paddle assembly that attaches underneath the cap decreasing the risk of contamination.
Replacement Components:
· The Complete Stirring Assembly consists of top cap, silicone gasket, glass shaft, compression fitting, magnet holder, paddle and magnetic stir bar.
· The Replacement Glass Shaft is the glass portion only.
|
Item Number |
Item Description |
PQ |
|
CLS-1450-100 |
BioProcess Spinner Flask, 100mL, Dimpled Bottom, Internal Impeller, Complete |
EACH |
|
CLS-1450-250 |
BioProcess Spinner Flask, 250mL, Dimpled Bottom, Internal Impeller, Complete |
EACH |
|
CLS-1450-500 |
BioProcess Spinner Flask, 500mL, Dimpled Bottom, Internal Impeller, Complete |
EACH |
|
CLS-1450-1L |
BioProcess Spinner Flask, 1,000mL, Dimpled Bottom, Internal Impeller, Complete |
EACH |
|
CLS-1450-3L |
BioProcess Spinner Flask, 3,000mL, Internal Impeller, Complete |
EACH |
|
Replacement Parts |
|
|
|
CLS-1705-106 |
#106 Orange Silicone O-Ring |
|
|
CLS-1451-01 |
Internal Stirring Assembly for 100mL BioProcess Spinner Flasks |
|
|
CLS-1451-03 |
Internal Stirring Assembly for 250mL BioProcess Spinner Flasks |
|
|
CLS-1451-05 |
Internal Stirring Assembly for 500mL BioProcess Spinner Flasks |
|
|
CLS-1451-06 |
Internal Stirring Assembly for 1,000mL BioProcess Spinner Flasks |
|
|
CLS-1451-07 |
Internal Stirring Assembly for 3,000mL BioProcess Spinner Flasks |
|
|
CLS-1451-40 |
Replacement Glass Shaft Only for 100mL Internal Impeller BioProcess Spinner Flasks |
|
|
CLS-1451-41 |
Replacement Glass Shaft Only for 250mL Internal Impeller BioProcess Spinner Flasks |
|
|
CLS-1451-42 |
Replacement Glass Shaft Only for 500mL Internal Impeller BioProcess Spinner Flasks |
|
|
CLS-1451-43 |
Replacement Glass Shaft Only for 1,000mL Internal Impeller BioProcess Spinner Flasks |
|
|
CLS-1451-44 |
Replacement Glass Shaft Only for 3,000mL Internal Impeller BioProcess Spinner Flasks |
|
|
CLS-1425-91 |
Replacement Stir Bar Magnet, 50-500mL Spinner Vessels |
|
|
CLS-1425-92 |
Replacement Stir Bar Magnet, 1L-3L Spinner Vessels |
|
|
CLS-1430-002 |
Silicone Plug Stopper |
|
|
CLS-1425-82 |
Spinner Cap Gasket Only, Silicone, 70mm |
|
|
CLS-1425-83 |
Spinner Cap Gasket Only, Silicone, 100mm |
|
CLS-1400
SPINNER FLASKS, FLAT BOTTOM, REPLACEMENT GLASS FLASK ONLY
Replacement vessel is supplied with black phenolic rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.
|
Item Number |
Item Description |
PQ |
|
CLS-1400-25 |
Spinner Flask, 25mL, Flat Bottom, Replacement Glass Flask ONLY |
EACH |
|
CLS-1400-50 |
Spinner Flask, 50mL, Flat Bottom, Replacement Glass Flask ONLY |
EACH |
|
CLS-1400-100 |
Spinner Flask, 100mL, Flat Bottom, Replacement Glass Flask ONLY |
EACH |
|
CLS-1400-250 |
Spinner Flask, 250mL, Flat Bottom, Replacement Glass Flask ONLY |
EACH |
|
CLS-1400-500 |
Spinner Flask, 500mL, Flat Bottom, Replacement Glass Flask ONLY |
EACH |
|
CLS-1400-1L |
Spinner Flask, 1000mL, Flat Bottom, Replacement Glass Flask ONLY |
EACH |
|
CLS-1400-3L |
Spinner Flask, 3000mL, Flat Bottom, Replacement Glass Flask ONLY |
EACH |
|
CLS-1400-6L |
Spinner Flask, 6000mL, Flat Bottom, Replacement Glass Flask ONLY |
EACH |
|
CLS-1400-8L |
Spinner Flask, 8000mL, Flat Bottom, Replacement Glass Flask ONLY |
EACH |
|
CLS-1400-15L |
Spinner Flask, 15000mL, Flat Bottom, Replacement Glass Flask ONLY |
EACH |
CLS-1401
SPINNER FLASKS, DIMPLED BOTTOM, REPLACEMENT GLASS FLASK ONLY
Replacement vessel is supplied with black phenolic rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.
|
Item Number |
Item Description |
PQ |
|
CLS-1401-100 |
Spinner Flask, 100mL, Dimpled Bottom, Replacement Glass Flask ONLY |
EACH |
|
CLS-1401-250 |
Spinner Flask, 250mL, Dimpled Bottom, Replacement Glass Flask ONLY |
EACH |
|
CLS-1401-500 |
Spinner Flask, 500mL, Dimpled Bottom, Replacement Glass Flask ONLY |
EACH |
|
CLS-1401-1L |
Spinner Flask, 1000mL, Dimpled Bottom, Replacement Glass Flask ONLY |
EACH |
|
CLS-1401-3L |
Spinner Flask, 3000mL, Dimpled Bottom, Replacement Glass Flask ONLY |
EACH |
|
CLS-1401-6L |
Spinner Flask, 6000mL, Dimpled Bottom, Replacement Glass Flask ONLY |
EACH |
|
CLS-1401-8L |
Spinner Flask, 8000mL, Dimpled Bottom, Replacement Glass Flask ONLY |
EACH |
CLS-1402
SPINNER FLASK, DIMPLED BOTTOM WITH BAFFLES, REPLACEMENT GLASS FLASK ONLY
CLS-1410
SPINNER FLASKS, STANDARD, COMPLETE
Flask is ideal for suspension cultures. Entire unit can be autoclaved at 121°C. Made from 33 expansion glass that conforms to ASTM Type 1, Class A requirements, and also conforms to USP Type 1 requirements. Design allows for the vertical adjustment of the impeller assembly while the assembly rides on a frictionless glass to PTFE interface. Overall height is approximate, assembled complete.
Flasks are Available in Three Styles:
· Flat Bottom
· Dimpled Bottom: To improve circulation while preventing cell accumulation in the center of the flask.
· Dimpled Bottom with Baffles: To further improve overall circulation while preventing cell accumulation in the center of the flask.
|
Item Number |
Item Description |
PQ |
|
CLS-1410-100 |
Spinner Flask, 100mL, Standard, Flat Bottom, Complete |
EACH |
|
CLS-1410-250 |
Spinner Flask, 250mL, Standard, Flat Bottom, Complete |
EACH |
|
CLS-1410-500 |
Spinner Flask, 500mL, Standard, Flat Bottom, Complete |
EACH |
|
CLS-1410-1L |
Spinner Flask, 1000mL, Standard, Flat Bottom, Complete |
EACH |
|
CLS-1410-3L |
Spinner Flask, 3000mL, Standard, Flat Bottom, Complete |
EACH |
|
CLS-1410-6L |
Spinner Flask, 6000mL, Standard, Flat Bottom, Complete |
EACH |
|
CLS-1410-8L |
Spinner Flask, 8000mL, Standard, Flat Bottom, Complete |
EACH |
|
CLS-1410-15L |
Spinner Flask, 15000mL, Standard, Flat Bottom, Complete |
EACH |
|
CLS-1411-100 |
Spinner Flask, 100mL, Standard, Dimpled Bottom, Complete |
EACH |
|
CLS-1411-250 |
Spinner Flask, 250mL, Standard, Dimpled Bottom, Complete |
EACH |
|
CLS-1411-500 |
Spinner Flask, 500mL, Standard, Dimpled Bottom, Complete |
EACH |
|
CLS-1411-1L |
Spinner Flask, 1000mL, Standard, Dimpled Bottom, Complete |
EACH |
|
CLS-1411-3L |
Spinner Flask, 3000mL, Standard, Dimpled Bottom, Complete |
EACH |
|
CLS-1411-6L |
Spinner Flask, 6000mL, Standard, Dimpled Bottom, Complete |
EACH |
CLS-1414
SPINNER FLASKS, INTERNAL STIRRING ASSEMBLY, COMPLETE
Stirring assembly in totally contained within the flask thereby decreasing the risk of contamination. Flask is ideal for suspension cultures. Entire unit can be autoclaved at 121°C. Made from 33 expansion glass that conforms to ASTM Type 1, Class A requirements. Overall height is approximate.
Flasks are Available in Three Styles:
· Flat Bottom
· Dimpled Bottom: To improve circulation while preventing cell accumulation in the center of the flask.
· Dimpled Bottom with Baffles: To further improve overall circulation while preventing cell accumulation in the center of the flask.
|
Item Number |
Item Description |
PQ |
|
CLS-1414-100 |
Spinner Flask, 100mL, Internal Stirring Assembly, Flat Bottom, Complete |
EACH |
|
CLS-1414-250 |
Spinner Flask, 250mL, Internal Stirring Assembly, Flat Bottom, Complete |
EACH |
|
CLS-1414-500 |
Spinner Flask, 500mL, Internal Stirring Assembly, Flat Bottom, Complete |
EACH |
|
CLS-1414-1L |
Spinner Flask, 1000mL, Internal Stirring Assembly, Flat Bottom, Complete |
EACH |
|
CLS-1414-3L |
Spinner Flask, 3000mL, Internal Stirring Assembly, Flat Bottom, Complete |
EACH |
|
CLS-1415-100 |
Spinner Flask, 100mL, Internal Stirring Assembly, Dimpled Bottom, Complete |
EACH |
|
CLS-1415-250 |
Spinner Flask, 250mL, Internal Stirring Assembly, Dimpled Bottom, Complete |
EACH |
|
CLS-1415-500 |
Spinner Flask, 500mL, Internal Stirring Assembly, Dimpled Bottom, Complete |
EACH |
|
CLS-1415-1L |
Spinner Flask, 1000mL, Internal Stirring Assembly, Dimpled Bottom, Complete |
EACH |
|
CLS-1415-3L |
Spinner Flask, 3000mL, Internal Stirring Assembly, Dimpled Bottom, Complete |
EACH |
CLS-1425
REPLACEMENT COMPONENTS, STANDARD SPINNER FLASKS
Replacement Components for CLS-1410, CLS-1411 and CLS-1412 Spinner Flasks.
The Impeller Assembly consists of the lower magnetic stir bar, paddle, retaining collar and magnet holder.
The Replacement Shaft consists of the glass shaft only.
The Cap Assembly consists of the corresponding screw cap, gasket and compression fitting.
|
Item Number |
Item Description |
PQ |
|
CLS-1425-01 |
Impeller Assembly, Standard Spinner Flask, 25mL |
EACH |
|
CLS-1425-02 |
Impeller Assembly, Standard Spinner Flask, 50mL |
EACH |
|
CLS-1425-03 |
Impeller Assembly, Standard Spinner Flask, 100mL and 250mL |
EACH |
|
CLS-1425-05 |
Impeller Assembly, Standard Spinner Flask, 500mL |
EACH |
|
CLS-1425-06 |
Impeller Assembly, Standard Spinner Flask, 1000mL |
EACH |
|
CLS-1425-07 |
Impeller Assembly, Standard Spinner Flask, 3000mL |
EACH |
|
CLS-1425-08 |
Impeller Assembly, Standard Spinner Flask, 6000mL |
EACH |
|
CLS-1425-09 |
Impeller Assembly, Standard Spinner Flask, 8000mL |
EACH |
|
CLS-1425-10 |
Impeller Assembly, Standard Spinner Flask, 15000mL |
EACH |
|
CLS-1425-20 |
Replacement Glass Shaft, 7mm, 25mL and 50mL Standard Spinner Flask |
EACH |
|
CLS-1425-21 |
Replacement Glass Shaft, 7mm, 100mL and 250mL Standard Spinner Flask |
EACH |
|
CLS-1425-22 |
Replacement Glass Shaft, 7mm, 500mL Standard Spinner Flask |
EACH |
|
CLS-1425-23 |
Replacement Glass Shaft, 7mm, 1000mL Standard Spinner Flask |
EACH |
|
CLS-1425-24 |
Replacement Glass Shaft, 7mm, 3000mL Standard Spinner Flask |
EACH |
|
CLS-1425-25 |
Replacement Glass Shaft, 9mm, 6000mL, 8000mL and 15000mL Standard Spinner Flask |
EACH |
|
CLS-1425-26 |
Replacement Glass Shaft, 9mm, 36000mL Standard Spinner Flask |
EACH |
|
CLS-1425-40 |
Cap Assembly, 25mL Standard Spinner Flask |
EACH |
|
CLS-1432-41 |
Cap Assembly, 50mL Standard Spinner Flask |
EACH |
|
CLS-1425-42 |
Cap Assembly, 100mL, 250mL and 500mL Standard Spinner Flask |
EACH |
|
CLS-1425-43 |
Cap Assembly, 1000mL and 3000mL Standard Spinner Flask |
EACH |
|
CLS-1425-44 |
Cap Assembly, 6000mL, 8000mL, 15000mL and 36000mL Standard Spinner Flask |
EACH |
CLS-1425-60
REPLACEMENT COMPONENTS FOR BOTH STANDARD AND INTERNAL STYLE SPINNER FLASKS
Replacement Components for Both Standard and Internal Style Spinner Flasks
|
Item Number |
Item Description |
PQ |
|
CLS-1425-60 |
Silicone O-Ring for Compression Fitting, 7mm Shaft |
EACH |
|
CLS-1425-61 |
Compression Fitting for Glass Shaft, 7mm Shaft |
EACH |
|
CLS-1425-70 |
Silicone O-Ring for Compression Fitting, 9mm Shaft |
EACH |
|
CLS-1425-71 |
Compression Fitting for Glass Shaft, 9mm Shaft |
EACH |
|
CLS-1425-80 |
Silicone Top Gasket, 38mm Cap |
EACH |
|
CLS-1425-81 |
Silicone Top Gasket, 51mm Cap |
EACH |
|
CLS-1425-82 |
Silicone Top Gasket, 70mm Cap |
EACH |
|
CLS-1425-83 |
Silicone Top Gasket, 100mm Cap, 7mm Shaft |
EACH |
|
CLS-1425-84 |
Silicone Top Gasket, 100mm Cap, 9mm Shaft |
EACH |
|
CLS-1425-90 |
Replacement Stir Bar Magnet for 25mL Vessel |
EACH |
|
CLS-1425-91 |
Replacement Stir Bar Magnet for 50-500mL Vessels |
EACH |
|
CLS-1425-92 |
Replacement Stir Bar Magnet for 1-3L Vessels |
EACH |
|
CLS-1425-93 |
Replacement Stir Bar Magnet for 6-36L Vessels |
EACH |
CLS-1426
REPLACEMENT COMPONENTS, INTERNAL STIRRING ASSEMBLY STYLE SPINNER FLASKS
Replacement components for CLS-1414, CLS-1415 and CLS-1416 Spinner Flasks.
The Complete Impeller Assembly consists of top cap, silicone liner, glass rod, compression fitting magnet holder, paddle and magnetic stir bar.
|
Item Number |
Item Description |
PQ |
|
CLS-1426-10 |
Internal Stirring Assembly, 100mL and 250mL Spinner Flask |
EACH |
|
CLS-1426-11 |
Internal Stirring Assembly, 500mL Spinner Flask |
EACH |
|
CLS-1426-12 |
Internal Stirring Assembly, 1000mL Spinner Flask |
EACH |
|
CLS-1426-13 |
Internal Stirring Assembly, 3000mL Spinner Flask |
EACH |
|
CLS-1426-16 |
Internal Stirring Assembly, 15000mL Spinner Flask |
EACH |
|
CLS-1426-20 |
Replacement Glass Shaft, 100mL and 250mL Internal Spinner Flask |
EACH |
|
CLS-1426-21 |
Replacement Glass Shaft, 500mL Internal Spinner Flask |
EACH |
|
CLS-1426-22 |
Replacement Glass Shaft, 1000mL Internal Spinner Flask |
EACH |
|
CLS-1426-23 |
Replacement Glass Shaft, 3000mL Internal Spinner Flask |
EACH |
CLS-1427
2-PORT ASSEMBLIES, SPINNER FLASKS
Port assemblies are constructed of 316L electro-polished stainless steel. These port assemblies fit all types of spinner flasks. The assemblies consist of a siphon and vent tube. Supplied complete with a GL-45 open top cap and silicone gasket.
|
Item Number |
Item Description |
PQ |
|
CLS-1427-01 |
2-Port Assembly, 500mL Spinner Flask |
EACH |
|
CLS-1427-02 |
2-Port Assembly, 1000mL Spinner Flask |
EACH |
|
CLS-1427-03 |
2-Port Assembly, 3000mL Spinner Flask |
EACH |
|
CLS-1427-04 |
2-Port Assembly, 6000mL Spinner Flask |
EACH |
|
CLS-1427-05 |
2-Port Assembly, 8000mL Spinner Flask |
EACH |
|
CLS-1427-06 |
2-Port Assembly, 15000mL Spinner Flask |
EACH |
|
CLS-1481-21 |
Replacement Open GL-45 Cap Only for Port Assembly |
P6 |
|
CLS-1428-11 |
Replacement Open GL-45 White FDA Silicone Gasket Only for Port Assembly |
EACH |
|
CLS-1481-20 |
Replacement Open GL-32 Cap Only for Port Assembly |
P6 |
|
CLS-1428-13 |
Replacement Open GL-32 Gasket Only for Port Assembly |
EACH |
CLS-1429
VENT PORT ASSEMBLY, SPINNER FLASKS
Vent port assembly is constructed of 316L electro polished stainless steel. These port assemblies fit all types of spinner flasks. Configurations consist of a single vent tube, vent and short fill tubes, or angled vent and fill tubes. Supplied complete with a GL-32 or 45 open top cap and silicone gasket.
|
Item Number |
Item Description |
PQ |
|
CLS-1429-01 |
2-Port Vent Assembly, 100-250mL Spinner Flask |
EACH |
|
CLS-1429-10 |
Single Port Vent Assembly, 500-36000mL Spinner Flask |
EACH |
|
CLS-1429-20 |
2-Port Vent Assembly, 500-36000mL Spinner Flask |
EACH |
|
CLS-1429-21 |
2-Port Angled Vent Assembly, 500-36000mL Spinner Flask |
EACH |
|
CLS-1481-22 |
Replacement Open GL-45 Cap Only for Port Assembly |
P6 |
|
CLS-1428-11 |
Replacement Open GL-45 White FDA Silicone Gasket Only for Port Assembly |
EACH |
|
CLS-1481-20 |
Replacement Open GL-32 Cap Only for Port Assembly |
P6 |
|
CLS-1428-13 |
Replacement Open GL-32 Gasket Only for Port Assembly |
EACH |
CLS-3460
SPINNER FLASKS PORT ASSEMBLIES, DISPOSABLE, BIO-SIMPLEX™
Bio-Simplex™ Spinner Flask accessories allow our customers to maintain their current investment in glassware, but with the convenience of a single-use, disposable accessory. Molded one piece construction creates a seamless fluid path and unobstructed inner bore. This eliminates contamination and product loss due to loose connections. The Bio-Simplex Flex-Joint uses a patent-pending design and construction which eliminates tube kinking and shape loss after autoclaving. The Bio-Simplex Flex Joint allows the user to create precisely the desired dip tube angle when used inside hand blown spinner flasks. This is important in order to the achieve clearance of impellors sensors, and probes located inside the spinner flask. Bio-Simplex™ port assemblies for spinner flasks includes the two or three port EZ Top® closure and tubing of C-Flex® pharmaceutical grade animal derived component free (ADCF) thermoplastic elastomer (TPE),a Bio-Simplex™ FlexJoint™ and polypropylene cap. Interchangeable with all Chemglass spinner flasks. Sold 1 each in a poly bag.
· Fill Line: 1/4 ID x 3/8 OD C-Flex® ADCF TPE Tubing
· Dip Tubes: Bio-Simplex™ FlexJoint™ with 0.15 ID x 1.4 OD
· Vent Line: 1/4 ID x 3/8 OD x 2 Long C-Flex® ADCF TPE Tubing
|
Item Number |
Item Description |
PQ |
|
CLS-3460-01 |
1L 2-Port Spinner Flask Assembly, Disposable |
EACH |
|
CLS-3460-02 |
3L 2-Port Spinner Flask Assembly, Disposable |
EACH |
|
CLS-3460-03 |
8L 2-Port Spinner Flask Assembly, Disposable |
EACH |
|
CLS-3460-04 |
15L 2-Port Spinner Flask Assembly, Disposable |
EACH |
|
CLS-3460-05 |
36L 2-Port Spinner Flask Assembly, Disposable |
EACH |
|
CLS-3460-06 |
1L 3-Port Spinner Flask Assembly, Disposable |
EACH |
|
CLS-3460-07 |
3L 3-Port Spinner Flask Assembly, Disposable |
EACH |
|
CLS-3460-08 |
8L 3-Port Spinner Flask Assembly, Disposable |
EACH |
|
CLS-3460-09 |
15L 3-Port Spinner Flask Assembly, Disposable |
EACH |
